Adata XPG Lancer Blade DDR5 32GB 6000MHz CL30 AX5U6000C3016G-DTLABBK

ADATA XPG Lancer Blade DDR5 32 GB (2×16 GB) 6000 MHz CL30 – AX5U6000C3016G-DTLABBK

The ADATA XPG Lancer Blade DDR5 kit offers high-performance memory optimized for modern gaming and content-creation desktop systems. With a rated speed of 6000 MT/s and low latency CL30, this 32 GB dual-channel kit (2×16 GB) supports Intel® XMP 3.0 and AMD EXPO™ for easy enabling of full performance profiles. :contentReference[oaicite:1]{index=1}

Key Features

• Total Capacity: 32 GB (2×16 GB modules). :contentReference[oaicite:2]{index=2}
• Speed & Timing: 6000 MT/s (DDR5-6000) with a CAS latency of CL30 (30-40-40) in the rated profile. :contentReference[oaicite:3]{index=3}
• Voltage: Typically 1.35 V for the XMP/EXPO rated profile; fallback JEDEC SPD at DDR5-4800 CL40-39-39 @ 1.10 V. :contentReference[oaicite:4]{index=4}
• Profiles Supported: Intel XMP 3.0 and AMD EXPO for simple one-click profile activation. :contentReference[oaicite:5]{index=5}
• Form Factor & Heatsink: 288-pin UDIMM design; low-profile heatsink (approx. 33.8 mm height) in the Lancer Blade series – good for systems with tall CPU coolers or compact cases. :contentReference[oaicite:6]{index=6}
• Reliability Features: On-die ECC (error-correction), built-in PMIC (power management) for stable operation, especially at higher speeds. :contentReference[oaicite:7]{index=7}
• Compatibility: Designed to work with modern Intel DDR5 platforms (12th/13th/14th Gen) and AMD AM5 platforms. :contentReference[oaicite:8]{index=8}

Benefits

• High Throughput & Low Latency: With 6000 MT/s and CL30 latency, users gain excellent bandwidth for gaming, streaming, multitasking, and creative workflows.
• Dual-Channel 32 GB Capacity: A strong baseline for modern use — enough for most games, simultaneous streaming, and heavy multitasking or productivity tasks.
• Easy Setup: Activate XMP/EXPO in BIOS and you’re set — no complex manual tuning required.
• Fit-Friendly Design: Low-profile heatsink makes it easier to fit into builds with large CPU air coolers or compact cases without clearance issues.
• Long-Term Compatibility: Supports both Intel and AMD platforms, making it a solid choice for future builds or upgrades.

Package Contents

• 2 × 16 GB DDR5 memory modules (kit AX5U6000C3016G-DTLABBK)
• Documentation & Warranty information

Recommended Use & Compatibility Tips

• Ensure your motherboard supports DDR5 memory and has the required DIMM slots (288-pin UDIMM).
• Enter BIOS/UEFI and enable the XMP or EXPO profile to run the modules at 6000 MT/s. Otherwise, they may run at default lower speed (e.g., 4800 MT/s).
• If using an AMD system (especially Ryzen/AM5), aim for an FCLK (Infinity Fabric) close to half the memory clock (e.g., ~3000 MHz) for optimal performance.
• Check your motherboard's QVL (Qualified Vendor List) for best compatibility, especially with high-speed DDR5 kits. While not always required, it helps ensure smoother experience. :contentReference[oaicite:9]{index=9}
• Since the Lancer Blade has a low-profile heatsink, verify clearance if you have an extremely large CPU cooler — but this variant is especially designed to avoid height issues. :contentReference[oaicite:10]{index=10}

Keywords

ADATA, XPG, Lancer Blade, DDR5, 32 GB, 6000 MHz, CL30, Intel XMP 3.0, AMD EXPO, low-profile memory, gaming RAM kit