Rotho babydesign Cyfrowy Termometr Kąpielowy Duck

rotho babydesign Digital Bath Thermometer Duck – Cute & Accurate Water Temperature Monitor

The rotho babydesign Digital Bath Thermometer Duck combines a classic rubber duck toy with precision digital temperature sensing. This clever device displays both water and room temperature in 1°C increments, with a red LED warning light that activates when water is too hot. Simply tap the duck to turn it on – perfect for busy parents who need one less thing to think about during bath time.

Key Features

• 2-in-1 design: Bath toy and digital thermometer in one floating duck.
• Accurate readings: Displays temperature in 1°C (1.8°F) increments.
• Red LED warning: Flashes red when water exceeds safe temperature (over 39°C / 102°F).
• Tap activation: Light tap turns thermometer on – no buttons to fumble.
• Auto shut-off: Powers down automatically when not in use (battery saving).
• Dual measurement: Monitors both water temperature AND room temperature.
• Floating design: Duck stays upright and visible in the water.
• German quality: rotho babydesign – over 20 years of baby product innovation.

Benefits for Safe Bathing

• Eliminates guesswork – know exactly when water is safe (ideal 37°C / 98.6°F).
• Visual and temperature warnings reduce risk of scalding.
• No more wrist-testing or separate thermometers needed.
• Fun duck design makes checking temperature part of play.
• Room temperature reading helps ensure baby doesn't get chilled after bath.
• Simple enough for grandparents and caregivers to use correctly.

Technical Specifications

• Display type: Digital LCD (hidden inside duck)
• Temperature range: 0°C – 50°C (32°F – 122°F)
• Accuracy: +/- 1°C
• Display increments: 1°C
• Warning system: Red LED flashes when water temperature exceeds safe level
• Activation: Tap duck gently to turn on
• Auto shut-off: After approx. 5 minutes of no water immersion
• Battery: Replaceable (specific type varies – typically CR2032 or LR44)
• Material: BPA-free waterproof plastic
• Floating: Yes – stable in water

How to Use

• Tap duck lightly on the head or body to turn on thermometer.
• Place duck in bathtub while filling.
• Read temperature on digital display (visible through duck's body).
• Wait for water to reach ideal baby bath temperature: 37-38°C (98.6-100.4°F).
• If red LED flashes, water is too hot – add cold water and wait.
• Duck will turn off automatically after bath.
• Duck can also be used as a room thermometer – place outside water before baby enters.

Safe Temperature Guidelines

• Ideal newborn bath: 37°C (98.6°F)
• Safe range for babies: 36°C – 38°C (96.8°F – 100.4°F)
• Too hot (RED LED): Above 39°C (102°F) – risk of scalding
• Too cool: Below 35°C (95°F) – baby may get chilled
• Always test water with elbow or wrist in addition to thermometer.

Battery Information

• Replace battery when display becomes dim or inaccurate.
• Use a small screwdriver to open battery compartment (located on duck's underside).
• Observe polarity (+/-) when inserting new battery.
• Dispose of old batteries properly – keep away from children.
• Remove battery if storing duck for extended periods.

Care Instructions

• Rinse duck with clean water after each bath.
• Wipe dry with soft cloth – do not submerge battery compartment if opened.
• Do not use abrasive cleaners or submerge in soapy water for long periods.
• Store in dry location away from direct sunlight.
• Check battery compartment seal periodically for water ingress.

What's Included

• 1 x rotho babydesign Digital Bath Thermometer Duck
• 1 x pre-installed battery (replaceable)
• Instruction manual with temperature guidelines

Keywords

rotho babydesign digital bath thermometer duck, baby bath water thermometer, floating duck thermometer with LED warning, digital bath temperature monitor, safe baby bath water temperature, 2-in-1 bath toy and thermometer, red alert hot water warning duck.